Fuel Filter

[Harley03joe]

Originally Posted by Mitch//pa

thanks Joe,
see post #35 i use the wix 33039

Your Very Welcome Mitch.

I Got The Same Filters Wix 33039, I Like Them Because The Fuel From The Tank Go Thru Them First, Not Like The Org Ones Where The Fuel Goes Thru The Outside First ,I Think This Is A Better Way To Filter Fuel.

But Will The Holes On The Top Of The Wix Filter Get Block Off By The Bowl Cork Gasket ??

I Do Have A Hand Punch, Do You Think It Would Be A Good Idea>>> To Make The Holes A Little Bigger On The Inboard Side ?
Joe

[Mitch//pa]

Originally Posted by Harley03joe

Your Very Welcome Mitch.

I Got The Same Filters Wix 33039, I Like Them Because The Fuel From The Tank Go Thru Them First, Not Like The Org Ones Where The Fuel Goes Thru The Outside First ,I Think This Is A Better Way To Filter Fuel.

But Will The Holes On The Top Of The Wix Filter Get Block Off By The Bowl Cork Gasket ??

I Do Have A Hand Punch, Do You Think It Would Be A Good Idea>>> To Make The Holes A Little Bigger On The Inboard Side ?
Joe

Hi Joe,
no modifications or reengineering is needed

[Rocketsled]

Has anyone put a magnet in the tank?

[Harley03joe]

Originally Posted by Mitch//pa

Hi Joe,
no modifications or reengineering is needed

Ok Mitch I See The Holes, Thanks Again For The Info.
Mitch Check This Place For Filters Ok
Thanks Again
Joe
http://www.discountfleetsupply.com
Discount Fleet Supply - Heavy Duty Fleet Products - Buy Online! - www.DiscountFleetSupply.com

[Mitch//pa]

Originally Posted by Harley03joe

Ok Mitch I See The Holes, Thanks Again For The Info.
Mitch Check This Place For Filters Ok
Thanks Again
Joe
http://www.discountfleetsupply.com
Discount Fleet Supply - Heavy Duty Fleet Products - Buy Online! - www.DiscountFleetSupply.com

thanks Joe,
for the link yes 2.90 is cheap but the shipping is over 10.00...
i get them from my shop jobber for 5.43 no shipping ,,no tax

[Harley03joe]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Mitch//pa

thanks Joe,
for the link yes 2.90 is cheap but the shipping is over 10.00...
i get them from my shop jobber for 5.43 no shipping ,,no tax

O well You Win Some A Loss The Rest Ha Ha
Thanks
Joe

[Harley03joe]

Originally Posted by Mitch//pa

Hi Joe,
no modifications or reengineering is needed

Mitch ? So You Don't Need The Spring ? Right
Joe

[Mitch//pa]

Originally Posted by Harley03joe

Mitch ? So You Don't Need The Spring ? Right
Joe

correct no spring, the filter is held up in place by the bowl

[Harley03joe]

Originally Posted by Mitch//pa

correct no spring, the filter is held up in place by the bowl

Ok Thank You Mitch
Joe