Installing LED stoplights?

[31 Model A]

Originally Posted by Patrick L.

Until you get yourself a test light and figure out how to use it, why not just plug the left light[6v] in the right side and see if any of the lights come on.
If the lights worked a week ago you probably just have a bad connection/ground.

The packaging for the passenger side LED was labeled 6 volt when actually the LED itself was labeled 12 volt. I have a proper 6 volt replacement coming from Snyders, that should be the end to the problem.

[Patrick L.]

Originally Posted by 31 Model A

The packaging for the passenger side LED was labeled 6 volt when actually the LED itself was labeled 12 volt. I have a proper 6 volt replacement coming from Snyders, that should be the end to the problem.

OK fine. Just making a suggestion as I thought you wanted to get this figured out as quickly as you could.

[31 Model A]

Originally Posted by Patrick L.

OK fine. Just making a suggestion as I thought you wanted to get this figured out as quickly as you could.

I did. Bob noticed one board was marked 12 volt which pretty much solved the problem although I'll feel better when the proper 6 volt LED arrives Friday and I get it installed.

[Patrick L.]

Originally Posted by 31 Model A

I did. Bob noticed one board was marked 12 volt which pretty much solved the problem although I'll feel better when the proper 6 volt LED arrives Friday and I get it installed.

Old news. I was referring to post #36.

Boy, I can't wait to see what happens with the signals.

[31 Model A]

Originally Posted by Patrick L.

Old news. I was referring to post #36.

Boy, I can't wait to see what happens with the signals.

That makes two of us.