Installing LED stoplights?

[Bob Johnson]

One of the circuit boards is clearly labeled 12V. The other one is unlabeled. Is it possible that you got a 12V lens in a 6V package?

Bob

[Y-Blockhead]

Originally Posted by Bob Johnson

One of the circuit boards is clearly labeled 12V. The other one is unlabeled. Is it possible that you got a 12V lens in a 6V package?

Bob

Bob it is labeled, one says 6v and one says 12v. Look close on the far left.

[Bob Johnson]

Yep I see the 6V now is is not in the same place and not as clear.

[Bob Johnson]

If you look at the diodes near the red wire at the top you will see that the 6V is reversed compared to the 12V. That confirms that the polarities are different, 6V pos ground, 12V neg ground.

Bob

[31 Model A]

Originally Posted by Bob Johnson

One of the circuit boards is clearly labeled 12V. The other one is unlabeled. Is it possible that you got a 12V lens in a 6V package?

Bob

That seems to be the story. I'll package it up and send it on back tomorrow.

That's for all the time and help guys!!! Simple problem solves BUT!!!!!

earlier when I took the passenger LED back out and put the bulbs back in, I still didn't get anything. Would the 6 volt LED cancel out the 6 volt bulbs?

[Y-Blockhead]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 31 Model A

Earlier when I took the passenger LED back out and put the bulbs back in, I still didn't get anything. Would the 6 volt LED cancel out the 6 volt bulbs?

Don't have an answer on that one. I do know it takes a lot more power for a regular bulb than a LED...