|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-24-2014, 12:38 PM | #1 |
Senior Member
Join Date: Dec 2012
Location: Spokane Wa.
Posts: 271
|
Install seat in 53 Victoria
I am ready to install the front seat in my 53 Vic and see a wire from one side to the other for linkage I think. Is there supposed to be some kind of return spring attached? There is a peg sticking out in the center with what looks like it should have something attached like a spring or something.
Thanks in advance, |
12-24-2014, 12:50 PM | #2 |
Senior Member
Join Date: May 2010
Location: Winnsboro, Texas
Posts: 463
|
Re: Install seat in 53 Victoria
That wire going across releases the latch on the passenger side. Before I installed the seat, I would set in it and try the release lever and make sure everything is working properly, moving back and forth, etc. Charles
|
Sponsored Links (Register now to hide all advertisements) |
|
12-24-2014, 01:15 PM | #3 | |
Senior Member
Join Date: Dec 2012
Location: Spokane Wa.
Posts: 271
|
Re: Install seat in 53 Victoria
Quote:
Thanks |
|
12-24-2014, 09:00 PM | #4 |
Senior Member
Join Date: Jul 2010
Location: Conifer, Colorado
Posts: 2,434
|
Re: Install seat in 53 Victoria
53' Mercury seat, hope it helps. If you want I can send you the picture and you can then zoom in on it.
[email protected] Last edited by Merc Cruzer; 12-24-2014 at 09:09 PM. |
12-24-2014, 10:01 PM | #5 | |
Senior Member
Join Date: Dec 2012
Location: Spokane Wa.
Posts: 271
|
Re: Install seat in 53 Victoria
Sponsored Links (Register now to hide all advertisements)
Quote:
Thank you |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|