1934-1935-1936 Ford Spare Wheel Covers.

[FlatheadTed]

Sponsored Links (Register now to hide all advertisements)

A bit of topic lf your interested !I body worked my Chrome trim for my 35 in the day by making a T shaped bit of flat steel welded to a 1/4 round rod . I shaped the flat bit to slide in with a curve the same shape as the chrome .while holding the Anvil in the vice I fed the chrome around it tapping the low spots face with a body hammer. it was near flat in some places .I would spray it black from time to time then block sand it with 600 grit working my way down to a finer grit, then buffed it. Ted