The Ford Barn

sidevalve8ba · 11-08-2024, 08:37 AM

A good friend of mine is re-assembling his long delayed Model A project and he asked me a question I cannot answer. But I know where I can get an answer! He is to the point of installing the gas tank and the windshield assembly. Which should he install first or does it matter?

It is a '31 Tudor if that matters.

Thanks for your help.

Gary WA · 11-08-2024, 10:12 AM

Gas Tank then glass would be the way!

JayJay · 11-08-2024, 10:20 AM

Quote:

Originally Posted by Gary WA

Gas Tank then glass would be the way!

I agree, you need to have the gas tank in place to take the weight of the windshield while you install it. Cover the gas tank with something thick to protect it (I have an old el-cheapo sleeping bag I use for things like this, but be careful of the zipper!) then use some wood blocks to hold the weight of the windshield while you line up and screw in the hinge.

Installing the windshield is definitely a two- or three-person job. Gas tank you can get by with two.

sidevalve8ba · 11-08-2024, 10:21 AM

Thank you. That looked to me to be the reasonable path to take but you folks have the experience.

katy · 11-08-2024, 10:57 AM

Nice lookin' '49.

sidevalve8ba · 11-08-2024, 11:57 AM

Sponsored Links (Register now to hide all advertisements)

Thank you katy. That was my first flathead and I have been a fan of them ever since.

katy · 11-09-2024, 12:22 PM

Back when, worked on them all, from the early ones w/water pumps in the head, up to and including the early '50s ones w/the top mounted distributor.

11-08-2024, 08:37 AM	#1
sidevalve8ba Senior Member Join Date: May 2013 Location: Harrisonburg, VA Posts: 914	Which goes first...... A good friend of mine is re-assembling his long delayed Model A project and he asked me a question I cannot answer. But I know where I can get an answer! He is to the point of installing the gas tank and the windshield assembly. Which should he install first or does it matter? It is a '31 Tudor if that matters. Thanks for your help. Last edited by sidevalve8ba; 11-08-2024 at 09:10 AM.

11-08-2024, 10:21 AM	#4
sidevalve8ba Senior Member Join Date: May 2013 Location: Harrisonburg, VA Posts: 914	Re: Which goes first...... Thank you. That looked to me to be the reasonable path to take but you folks have the experience.

11-08-2024, 10:57 AM	#5
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,712	Re: Which goes first...... Nice lookin' '49. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

11-08-2024, 11:57 AM	#6
sidevalve8ba Senior Member Join Date: May 2013 Location: Harrisonburg, VA Posts: 914	Re: Which goes first...... Sponsored Links (Register now to hide all advertisements) Thank you katy. That was my first flathead and I have been a fan of them ever since.

11-09-2024, 12:22 PM	#7
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,712	Re: Which goes first...... Back when, worked on them all, from the early ones w/water pumps in the head, up to and including the early '50s ones w/the top mounted distributor. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode