Need '35 pickup window channel dimensions

[Heard]

I do not need any of the fuzzy stuff or related stuff. I have all of this.

What I need is the entire passenger side lower glass channel shown in your picture to the far right. The part that the glass is mounted in with the tape.

If I can't find that (specifically made for my pickup), I'll take ANY glass channel that has a 9" or longer piece of lift channel so that I can fab what I need. The lift channel is the part where the regulator arms slide, shown in your pic where the stop screw goes, pointed to generally as 'B'. It doesn't have to be the piece to the right with the stop screw. It can be the left side as long as it is at least 9" long. If I have this, I can drill out the welds and move it to the stuff I have.

Thanks!
Heard