The Ford Barn

Model "A" Fords · 05-20-2024, 06:41 AM

Dissolve the rust (Evaporust) and you may be able to see some traces of the printing with a magnifying glass. This view looks like an Eaton cap. A side view would help.

Technite73 · 05-20-2024, 12:36 PM

Quote:

Originally Posted by Model "A" Fords

Dissolve the rust (Evaporust) and you may be able to see some traces of the printing with a magnifying glass. This view looks like an Eaton cap. A side view would help.

I have soaked it in Evaporust. It removed all the rust but there is no trace of any markings.

Two-Gun Bob · 05-20-2024, 01:46 PM

Can these caps be disassembled to work out dents in the top and then re-assembled?

05-20-2024, 06:41 AM	#1
Model "A" Fords Senior Member Join Date: Jul 2010 Location: Ontario, Canada Posts: 286	Re: Eaton gas cap, original or aftermarket? Dissolve the rust (Evaporust) and you may be able to see some traces of the printing with a magnifying glass. This view looks like an Eaton cap. A side view would help.

05-20-2024, 01:46 PM	#3
Two-Gun Bob Junior Member Join Date: Nov 2010 Posts: 19	Re: Eaton gas cap, original or aftermarket? Can these caps be disassembled to work out dents in the top and then re-assembled?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode