The Ford Barn

Keith True · 08-25-2010, 06:38 PM

I was searching through my puller shelf for what I need and happened to notice a number on an old puller.For years I have dragged home every puller I could find,and when I need a special one I usually have some old thing to modify.I figured I could weld something here,bend that there,and have what I needed.Then I noticed a number on it,5Z326.I have other old Ford tools with 5Z on them,so I thought I would see if it was something I should leave intact.It has a fixed yoke,and looks like some pitman arm pullers I have.

08-25-2010, 06:38 PM	#1
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,421	Possible Ford tool I was searching through my puller shelf for what I need and happened to notice a number on an old puller.For years I have dragged home every puller I could find,and when I need a special one I usually have some old thing to modify.I figured I could weld something here,bend that there,and have what I needed.Then I noticed a number on it,5Z326.I have other old Ford tools with 5Z on them,so I thought I would see if it was something I should leave intact.It has a fixed yoke,and looks like some pitman arm pullers I have.