Possible Ford tool
 

I was searching through my puller shelf for what I need and happened to notice a number on an old puller.For years I have dragged home every puller I could find,and when I need a special one I usually have some old thing to modify.I figured I could weld something here,bend that there,and have what I needed.Then I noticed a number on it,5Z326.I have other old Ford tools with 5Z on them,so I thought I would see if it was something I should leave intact.It has a fixed yoke,and looks like some pitman arm pullers I have.

Re: Possible Ford tool
 

Keith,

Pinon puller?

Dudley

Re: Possible Ford tool
 

The 5-Z-326 is the transmission gear and camshaft gear puller for the model T, deaker service tool.

Re: Possible Ford tool
 

Thanks,I guess I will not be modifying it for another use.It is pretty nice with the original paint,(thin)still on it.I have probably ruined a dozen old pullers by making them over into something I could use. If I know what they were for I leave them as is.Spotting the 5Z saved this one.