Cam Timing Gear

[purplewg]

So I jus replaced my first cam gear and thought I had the marks c. It fired up and ran but but was shooting flames out the exhaust. lol This one has a newer style distributor cap so I couldn't see the rotor. I had set the timing pin and set my distributor timing using a light. I knew the rotor was pointing in the general area of #1 but couldn't see it with the cap on. I finally found an old distributor cap and this is what I see setting on TDC with the rotor on. I am assuming I am a tooth off on the cam timing gear. What do you think? Thanks