The Ford Barn

Joe K · 07-13-2022, 11:44 AM

It may vary a bit depending on the Timing Gear cover. Later covers held the generator "higher" ostensibly to better clear the coolant pipe.

(Nearby and handy) My spare engine (earlier "lower" timing cover - likely yours) has on it a "Goodyear Hi-Miler 22430" which is a "cog-belt" on the inner side. You may not want this since it's not a "stock" appearance. I have placed next to it two belts which are the more common belt sold by Tam's and these are marked "42-6324"

Another thread I elaborate about these belts. https://fordbarn.com/forum/showpost.php?p=1467681 There is some "finesse" necessary to place these apparently 42" "B" section belts.

Joe K

07-13-2022, 11:44 AM	#2
Joe K Senior Member Join Date: Jul 2010 Location: Cow Hampshire Posts: 4,612	Re: Generator Belt Part Number It may vary a bit depending on the Timing Gear cover. Later covers held the generator "higher" ostensibly to better clear the coolant pipe. (Nearby and handy) My spare engine (earlier "lower" timing cover - likely yours) has on it a "Goodyear Hi-Miler 22430" which is a "cog-belt" on the inner side. You may not want this since it's not a "stock" appearance. I have placed next to it two belts which are the more common belt sold by Tam's and these are marked "42-6324" Another thread I elaborate about these belts. https://fordbarn.com/forum/showpost.php?p=1467681 There is some "finesse" necessary to place these apparently 42" "B" section belts. Joe K __________________ Shudda kept the horse.