The Ford Barn

JRHASZARD · 12-30-2020, 08:41 PM

I am looking for instructions for activating the South Wind heater in my 39 Pickup. The heater is installed and the part protrudes through the firewall. A friend provided me with a jet tube but it needs to be installed. I believe a hole must be drilled in the lid of the float chamber on the Model 94 carb to provide a fuel source through the capillary tube. I am unsure about where to drill and how to make the connections to the firewall fitting. I am rebuilding the carb and have the plate that goes under it to provide the vacuum source.
Any kindness in helping me is greatly appreciated.
I am considering selling the Dodge Ram and using this one as my only truck when restoration is complete so it will need a heater and later A/C if there is such a modification.
Thanks,
John in Red Virginia

12-30-2020, 08:41 PM	#1
JRHASZARD Senior Member Join Date: Jun 2010 Location: Ophelia,Va. Posts: 219	South Wind Heatew I am looking for instructions for activating the South Wind heater in my 39 Pickup. The heater is installed and the part protrudes through the firewall. A friend provided me with a jet tube but it needs to be installed. I believe a hole must be drilled in the lid of the float chamber on the Model 94 carb to provide a fuel source through the capillary tube. I am unsure about where to drill and how to make the connections to the firewall fitting. I am rebuilding the carb and have the plate that goes under it to provide the vacuum source. Any kindness in helping me is greatly appreciated. I am considering selling the Dodge Ram and using this one as my only truck when restoration is complete so it will need a heater and later A/C if there is such a modification. Thanks, John in Red Virginia