The Ford Barn

mrtexas · 03-09-2017, 12:11 AM

I'm sure this has been discussed many times but not recently. I had my original 41 radiator leaks fixed, then rodded out. It still leaks. I have an original flathead motor on a stock car except for Mitchell OD, 12v, and electronic ignition. Originality is not my top priority but good fit is.

So time for new radiator.

Is Brassworks the best out there? Pretty pricey at $929 for 4 row without split core or crank hole. Built to order

How about http://classicfordradiator.com/39-40...or-Copper.aspx ?
They got a 4 row for $565 in stock. Looks like no fender bracket allowance.

How about an aluminum radiator?

Re-core original but who would do that?

How about NOS?

03-09-2017, 12:11 AM	#1
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,420	41 radiator I'm sure this has been discussed many times but not recently. I had my original 41 radiator leaks fixed, then rodded out. It still leaks. I have an original flathead motor on a stock car except for Mitchell OD, 12v, and electronic ignition. Originality is not my top priority but good fit is. So time for new radiator. Is Brassworks the best out there? Pretty pricey at $929 for 4 row without split core or crank hole. Built to order How about http://classicfordradiator.com/39-40...or-Copper.aspx ? They got a 4 row for $565 in stock. Looks like no fender bracket allowance. How about an aluminum radiator? Re-core original but who would do that? How about NOS? __________________ 41 woodie https://41fordwoodie.weebly.com/