The Ford Barn

dirt t · 09-30-2015, 02:15 PM

Could use some help. wescottsauto.com lists 103.5" wheel base, but if you add all there dimensions it comes up a 1/4" short. the running board mounts from center of rear cross member to center of drivers rear running board bracket is 22 1/2 " 29 Ford chassis lists it at 29" and 27 3/4" to front drivers bracket. Wescott has no dimension for front bracket. I have spent hours looking for the correct dimensions to still have doubt what is right. I purchased Model A plans from an outfit in Canada and they are hot rod plans without any original dimensions for me it was a waste of money.
Thank you for you time. If mounting hole dimensions are correct please let me know.
Terry

09-30-2015, 02:15 PM	#1
dirt t Senior Member Join Date: May 2010 Location: Kingman,AZ Posts: 124	A Frame dimensions Could use some help. wescottsauto.com lists 103.5" wheel base, but if you add all there dimensions it comes up a 1/4" short. the running board mounts from center of rear cross member to center of drivers rear running board bracket is 22 1/2 " 29 Ford chassis lists it at 29" and 27 3/4" to front drivers bracket. Wescott has no dimension for front bracket. I have spent hours looking for the correct dimensions to still have doubt what is right. I purchased Model A plans from an outfit in Canada and they are hot rod plans without any original dimensions for me it was a waste of money. Thank you for you time. If mounting hole dimensions are correct please let me know. Terry