The Ford Barn

Dave27 · 07-29-2011, 10:45 AM

Got a few questions if thats ok,I cant remember mind goes first I guess

Got the winshield installed yesterday and I cant remember the order the 2 chrome things that hold the window out go on. I have a thick washer chrome on one side plastic on the other, the chrome tip out arm, also a washer,thread on round nut and I think there is a piece that goes on the shaft first up against the vertical trim stanchons. Anyway I just need the order of the stackup and which way that chrome washer with plastic orients.Also I pick up the new glass today for the rear and quarter windows it states u shaped rubber that goes on the glass I assume and then what holds it in the body on the outside and the inner trim piece cant remember. Also what is the name and size of the u-shaped rubber i want to see if my local glass shop carries it. I'll post this on the group as well...Thanks in advance....Dave

Dave27 · 07-29-2011, 02:55 PM

Did a search and a local ford Barner Pm'd me so I think I'm good now

Tom Wesenberg · 07-29-2011, 03:17 PM

What's up with the "PM"?

Wouldn't it be better to just post the answer for all to learn?

Mitch//pa · 07-29-2011, 03:43 PM

secret squirrel i guess

Dave27 · 07-29-2011, 04:23 PM

Oh...hahaha...Here I'll post it.

"There is a cup washer first,then the swing arm, lock washer,and screw."

For the back windows
The rubber is a u channel that goes around the window and the frame and holds everything in place.Some people use a sealer they feel is best to go over the outside of the frame. The uchannel seals the window to the frame but from my research there is not a rubber that seals the frame to the body thus the need for a sealer of your choice.Some say black silicone others say,non acidic sealer,etc...hope this helps someone...Thanks....Dave

Tom Wesenberg · 07-29-2011, 04:30 PM

Sponsored Links (Register now to hide all advertisements)

Thanks Dave.
"There is a cup washer first,then the swing arm, lock washer,and screw."

Shouldn't there be a flat washer between the arm and lock washer? MyTudor is buried and I haven't looked at it for some time, but I'd think there should be a flat washer in there.

Dave27 · 07-31-2011, 01:31 AM

I was wondering where that little bugger went

07-29-2011, 10:45 AM	#1
Dave27 Senior Member Join Date: May 2011 Location: Snohomish,Wa. Posts: 139	Window assy questions,cant remember I should have taken more pictures Got a few questions if thats ok,I cant remember mind goes first I guess Got the winshield installed yesterday and I cant remember the order the 2 chrome things that hold the window out go on. I have a thick washer chrome on one side plastic on the other, the chrome tip out arm, also a washer,thread on round nut and I think there is a piece that goes on the shaft first up against the vertical trim stanchons. Anyway I just need the order of the stackup and which way that chrome washer with plastic orients.Also I pick up the new glass today for the rear and quarter windows it states u shaped rubber that goes on the glass I assume and then what holds it in the body on the outside and the inner trim piece cant remember. Also what is the name and size of the u-shaped rubber i want to see if my local glass shop carries it. I'll post this on the group as well...Thanks in advance....Dave

07-29-2011, 02:55 PM	#2
Dave27 Senior Member Join Date: May 2011 Location: Snohomish,Wa. Posts: 139	Re: Window assy questions,cant remember I should have taken more pictures Did a search and a local ford Barner Pm'd me so I think I'm good now

07-29-2011, 03:17 PM	#3
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Window assy questions,cant remember I should have taken more pictures What's up with the "PM"? Wouldn't it be better to just post the answer for all to learn?

07-29-2011, 03:43 PM	#4
Mitch//pa BANNED Join Date: May 2010 Location: Bucks County, PA Posts: 11,454	Re: Window assy questions,cant remember I should have taken more pictures secret squirrel i guess

07-29-2011, 04:23 PM	#5
Dave27 Senior Member Join Date: May 2011 Location: Snohomish,Wa. Posts: 139	Re: Window assy questions,cant remember I should have taken more pictures Oh...hahaha...Here I'll post it. "There is a cup washer first,then the swing arm, lock washer,and screw." For the back windows The rubber is a u channel that goes around the window and the frame and holds everything in place.Some people use a sealer they feel is best to go over the outside of the frame. The uchannel seals the window to the frame but from my research there is not a rubber that seals the frame to the body thus the need for a sealer of your choice.Some say black silicone others say,non acidic sealer,etc...hope this helps someone...Thanks....Dave

07-29-2011, 04:30 PM	#6
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Window assy questions,cant remember I should have taken more pictures Sponsored Links (Register now to hide all advertisements) Thanks Dave. "There is a cup washer first,then the swing arm, lock washer,and screw." Shouldn't there be a flat washer between the arm and lock washer? MyTudor is buried and I haven't looked at it for some time, but I'd think there should be a flat washer in there.

07-31-2011, 01:31 AM	#7
Dave27 Senior Member Join Date: May 2011 Location: Snohomish,Wa. Posts: 139	Re: Window assy questions,cant remember I should have taken more pictures I was wondering where that little bugger went