The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Model A (1928-31) (https://www.fordbarn.com/forum/forumdisplay.php?f=3)
-   -   Window assy questions,cant remember I should have taken more pictures (https://www.fordbarn.com/forum/showthread.php?t=43497)

Dave27 07-29-2011 10:45 AM

Window assy questions,cant remember I should have taken more pictures
 

Got a few questions if thats ok,I cant remember mind goes first I guess :) Got the winshield installed yesterday and I cant remember the order the 2 chrome things that hold the window out go on. I have a thick washer chrome on one side plastic on the other, the chrome tip out arm, also a washer,thread on round nut and I think there is a piece that goes on the shaft first up against the vertical trim stanchons. Anyway I just need the order of the stackup and which way that chrome washer with plastic orients.Also I pick up the new glass today for the rear and quarter windows it states u shaped rubber that goes on the glass I assume and then what holds it in the body on the outside and the inner trim piece cant remember. Also what is the name and size of the u-shaped rubber i want to see if my local glass shop carries it. I'll post this on the group as well...Thanks in advance....Dave

Dave27 07-29-2011 02:55 PM

Re: Window assy questions,cant remember I should have taken more pictures
 

Did a search and a local ford Barner Pm'd me so I think I'm good now

Tom Wesenberg 07-29-2011 03:17 PM

Re: Window assy questions,cant remember I should have taken more pictures
 

What's up with the "PM"? :confused:

Wouldn't it be better to just post the answer for all to learn?:)

Mitch//pa 07-29-2011 03:43 PM

Re: Window assy questions,cant remember I should have taken more pictures
 

secret squirrel i guess

Dave27 07-29-2011 04:23 PM

Re: Window assy questions,cant remember I should have taken more pictures
 

Oh...hahaha...Here I'll post it.

"There is a cup washer first,then the swing arm, lock washer,and screw."

For the back windows
The rubber is a u channel that goes around the window and the frame and holds everything in place.Some people use a sealer they feel is best to go over the outside of the frame. The uchannel seals the window to the frame but from my research there is not a rubber that seals the frame to the body thus the need for a sealer of your choice.Some say black silicone others say,non acidic sealer,etc...hope this helps someone...Thanks....Dave

Tom Wesenberg 07-29-2011 04:30 PM

Re: Window assy questions,cant remember I should have taken more pictures
 

Thanks Dave.
"There is a cup washer first,then the swing arm, lock washer,and screw."

Shouldn't there be a flat washer between the arm and lock washer? MyTudor is buried and I haven't looked at it for some time, but I'd think there should be a flat washer in there.

Dave27 07-31-2011 01:31 AM

Re: Window assy questions,cant remember I should have taken more pictures
 

I was wondering where that little bugger went :)


All times are GMT -5. The time now is 01:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.