Sealing head bolts

[Heard]

I'm sure this has been covered a lot over the years. You guys that have done this a hundred times, what is the best way to seal the threads on the head bolts.

I think I'm going to have to replace the heads on my 8BA in the coupe. Last time I had the heads off, I wasn't sure I would ever get the head bolts to stop weeping.

Thanks!!
Heard

[Tim Ayers]

Heard,

I've used ARP sealant previously. Using that, had some leakers. Most recently, I used Hercules brand steam pipe thread sealant that I got at a plumbing jobber. I'll post the exact product when I get home. It was cheap.

Not one leaker and it has remained dry for months.

[rockfla]

This is what I use.


https://www.amazon.com/SUPCO-HS10001...s%2C114&sr=8-3

[ThirstyThirty]

have used Permatex Aviation form-a-gasket on thread ends in block of head bolts and engines using studs. no leaks! but be sure contents well mixed and not any bottom settling. I coat threads fastener and threads block. read directions.

[51504bat]

The machinist who rebuilt my 8ba said to use #2 Permatex on the head bolts. No issues in 10,000 miles or so.

[chap52]

Sponsored Links (Register now to hide all advertisements)

I used Permatex Thread Sealant #80632 Chap