|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2022
Location: Lakeland Florida
Posts: 380
|
![]()
Install of windshield antenna has come to a halt…
The antenna lead won’t fit in the female end of antenna cable. Is there a transition connector for this? |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Feb 2011
Location: Campbellville, Ontario
Posts: 16
|
![]()
I havent hit that point yet, but in researching correct parts, it appears the aftermarket leads dont make much sense like that.
Still figuring it out as well..... |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2022
Location: Lakeland Florida
Posts: 380
|
![]()
Problem solved!
The problem was with the female cable end. I took a small uni-bit and by hand very slowly turned the bit to slightly enlarge the opening. The antenna lead then snuggly plugged in! |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Port Townsend, WA
Posts: 601
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|