![]() |
Antenna connection 1 Attachment(s)
Install of windshield antenna has come to a halt…
The antenna lead won’t fit in the female end of antenna cable. Is there a transition connector for this? |
Re: Antenna connection I havent hit that point yet, but in researching correct parts, it appears the aftermarket leads dont make much sense like that.
Still figuring it out as well..... |
Re: Antenna connection Problem solved!
The problem was with the female cable end. I took a small uni-bit and by hand very slowly turned the bit to slightly enlarge the opening. The antenna lead then snuggly plugged in! |
Re: Antenna connection 1 Attachment(s)
I have this from a 40 if it would help.
|
All times are GMT -5. The time now is 09:10 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.