The Ford Barn

rob63mess · 09-13-2015, 07:43 AM

I got the pan gasket set from Snyders. There are 2 identical pieces in it that are about 1/4 by 3/8 by 5 inches long. One goes between the rear main cap and the pan .... where does the other one go?

john charlton · 09-13-2015, 08:09 AM

There are two different rear main caps which take the cork seal for 28/29 use the 13/32" wide and for 30/31 use the 3/8" wide . But if your engine has been replaced/rebuilt you should check the width of the cap seal width .

John in damp rainy Suffolk County England

rob63mess · 09-13-2015, 10:58 AM

Sponsored Links (Register now to hide all advertisements)

Thanks John.

09-13-2015, 07:43 AM	#1
rob63mess Senior Member Join Date: Dec 2010 Location: newark ohio Posts: 569	pan gasket set I got the pan gasket set from Snyders. There are 2 identical pieces in it that are about 1/4 by 3/8 by 5 inches long. One goes between the rear main cap and the pan .... where does the other one go?

09-13-2015, 08:09 AM	#2
john charlton Senior Member Join Date: May 2010 Posts: 1,343	Re: pan gasket set There are two different rear main caps which take the cork seal for 28/29 use the 13/32" wide and for 30/31 use the 3/8" wide . But if your engine has been replaced/rebuilt you should check the width of the cap seal width . John in damp rainy Suffolk County England

09-13-2015, 10:58 AM	#3
rob63mess Senior Member Join Date: Dec 2010 Location: newark ohio Posts: 569	Re: pan gasket set Sponsored Links (Register now to hide all advertisements) Thanks John.