pan gasket set
 

I got the pan gasket set from Snyders. There are 2 identical pieces in it that are about 1/4 by 3/8 by 5 inches long. One goes between the rear main cap and the pan .... where does the other one go?

Re: pan gasket set
 

There are two different rear main caps which take the cork seal for 28/29 use the 13/32" wide and for 30/31 use the 3/8" wide . But if your engine has been replaced/rebuilt you should check the width of the cap seal width .

John in damp rainy Suffolk County England

Re: pan gasket set
 

Thanks John.