The Ford Barn

Bullerman · 04-25-2025, 10:17 AM

Looking for step by step to changing motor mounts on a 50 Ford Custom with Flathead V8. Also the admission mount.
I think I have seen it on here before but can't find it. Thanks

19Fordy · 04-25-2025, 11:29 AM

Please let us know the details about what engine you are planning to install and what transmission, if any.

glennpm · 04-25-2025, 01:41 PM

I have a '32 with a 59AB engine. My front pulley seal surface was worn so I bought a new pulley from Kiwi and built this wood jacking tool to raise the engine. I had done this in the past on my'40 with a SBC so I knew what I needed.

Glenn

tubman · 04-25-2025, 04:36 PM

Guys, this guy is having clutch trouble with an 8BA in a '50 Ford and has posted about it a bunch of times. It looks like he has some bad or missing parts. A lot of us suggested new motor mounts, which it looks like he is getting to.

glennpm · 04-26-2025, 06:54 AM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by tubman

Guys, this guy is having clutch trouble with an 8BA in a '50 Ford and has posted about it a bunch of times. It looks like he has some bad or missing parts. A lot of us suggested new motor mounts, which it looks like he is getting to.

Yeah, I remember this now. Thanks for the reminder.

04-25-2025, 10:17 AM	#1
Bullerman Senior Member Join Date: Nov 2024 Posts: 149	Motor mounts change Looking for step by step to changing motor mounts on a 50 Ford Custom with Flathead V8. Also the admission mount. I think I have seen it on here before but can't find it. Thanks

04-25-2025, 11:29 AM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 11,604	Re: Motor mounts change Please let us know the details about what engine you are planning to install and what transmission, if any.

04-25-2025, 01:41 PM	#3
glennpm Senior Member Join Date: Sep 2014 Location: Mid-Coast Maine Posts: 2,815	Re: Motor mounts change I have a '32 with a 59AB engine. My front pulley seal surface was worn so I bought a new pulley from Kiwi and built this wood jacking tool to raise the engine. I had done this in the past on my'40 with a SBC so I knew what I needed. Glenn __________________ Archives of historical but relevant older articles: ------------- Hover mouse over the links below and click! ~~~~~~~~~~~~~~~~~--------------- Rumble Seat's Notes Techno-Source-for-the-1932-thru-1953-Flathead-Ford

04-25-2025, 04:36 PM	#4
tubman Senior Member Join Date: Dec 2013 Location: Minnesota, Florida Keys Posts: 11,633	Re: Motor mounts change Guys, this guy is having clutch trouble with an 8BA in a '50 Ford and has posted about it a bunch of times. It looks like he has some bad or missing parts. A lot of us suggested new motor mounts, which it looks like he is getting to.