Motor mounts change
 

Looking for step by step to changing motor mounts on a 50 Ford Custom with Flathead V8. Also the admission mount.
I think I have seen it on here before but can't find it. Thanks

Re: Motor mounts change
 

Please let us know the details about what engine you are planning to install and what transmission, if any.

Re: Motor mounts change
 

I have a '32 with a 59AB engine. My front pulley seal surface was worn so I bought a new pulley from Kiwi and built this wood jacking tool to raise the engine. I had done this in the past on my'40 with a SBC so I knew what I needed.

Glenn

https://www.fordbarn.com/forum/attac...5&d=1745606315
https://www.fordbarn.com/forum/attac...6&d=1745606315
https://www.fordbarn.com/forum/attac...3&d=1745605796
https://www.fordbarn.com/forum/attac...2&d=1745605796
https://www.fordbarn.com/forum/attac...1&d=1745605796

Re: Motor mounts change
 

Guys, this guy is having clutch trouble with an 8BA in a '50 Ford and has posted about it a bunch of times. It looks like he has some bad or missing parts. A lot of us suggested new motor mounts, which it looks like he is getting to.

Re: Motor mounts change
 

Yeah, I remember this now. Thanks for the reminder.