|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 621
|
![]()
Does anyone know of an electric wiper motor that will fit in the header of a '35 pickup?
I am aware of the Newport Engineering solution but I don't want to have to cut the header so I'm looking for a single wiper motor that will fit. Thanks, Heard
__________________
Do I look like I have a plan B? |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Sep 2013
Location: SoCal-Redlands
Posts: 3,413
|
![]()
Try Might Mite wipers
https://raingearwipers.com/mighty-wiper/
__________________
Making the simple complicated for over 30 years. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Posts: 2,908
|
![]()
I used a raingear in a '32 ok. 12 volt tho and uses a 1 amp fuse- easy to pop, so need easy access to that. Newc
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2011
Location: Omak, Washington
Posts: 249
|
![]()
I used a mighty wiper in my 37, fit fine, but your 35 might be tighter
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 621
|
![]()
Yes, I've looked at the Mighty Wipers. It is difficult to measure the available space but I don't think it will fit. 12 volt is what I'm looking for.
__________________
Do I look like I have a plan B? |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,562
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,998
|
![]()
Maybe go to your local Pick-N-Pull and look at the rear window wipers from the small SUVs
That's what I did years ago, got a rear wiper motor outta a jap hatchback, think it was a ford laser, it has 120 degree sweep, fits nicely behind the header panel of my 35 sedan.
__________________
Unfortunately, two half wits don't make a whole wit! |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 621
|
![]()
Good ideas! I would think a motor for a boat or golf cart etc. might work also. Been looking at those on line ,but again, it is hard to tell from the measurements whether or not it will wok. Junkyard might be my best bet.
__________________
Do I look like I have a plan B? |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|