The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Wiper motor for '35 pickup (https://www.fordbarn.com/forum/showthread.php?t=345494)

Heard 01-11-2025 12:27 PM

Wiper motor for '35 pickup
 

Does anyone know of an electric wiper motor that will fit in the header of a '35 pickup?

I am aware of the Newport Engineering solution but I don't want to have to cut the header so I'm looking for a single wiper motor that will fit.

Thanks,
Heard

51504bat 01-11-2025 01:47 PM

Re: Wiper motor for '35 pickup
 

Try Might Mite wipers
https://raingearwipers.com/mighty-wiper/

Newc 01-11-2025 02:48 PM

Re: Wiper motor for '35 pickup
 

I used a raingear in a '32 ok. 12 volt tho and uses a 1 amp fuse- easy to pop, so need easy access to that. Newc

37 truck 01-11-2025 06:29 PM

Re: Wiper motor for '35 pickup
 

I used a mighty wiper in my 37, fit fine, but your 35 might be tighter

Heard 01-12-2025 11:31 AM

Re: Wiper motor for '35 pickup
 

Yes, I've looked at the Mighty Wipers. It is difficult to measure the available space but I don't think it will fit. 12 volt is what I'm looking for.

TJ 01-12-2025 01:54 PM

Re: Wiper motor for '35 pickup
 

Maybe go to your local Pick-N-Pull and look at the rear window wipers from the small SUVs.

Brian 01-13-2025 03:02 AM

Re: Wiper motor for '35 pickup
 

Maybe go to your local Pick-N-Pull and look at the rear window wipers from the small SUVs


That's what I did years ago, got a rear wiper motor outta a jap hatchback, think it was a ford laser, it has 120 degree sweep, fits nicely behind the header panel of my 35 sedan.

Heard 01-13-2025 11:32 AM

Re: Wiper motor for '35 pickup
 

Good ideas! I would think a motor for a boat or golf cart etc. might work also. Been looking at those on line ,but again, it is hard to tell from the measurements whether or not it will wok. Junkyard might be my best bet.


All times are GMT -5. The time now is 03:17 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.