Releasing a stud remover

[Clem Clement]

I got the stud out. Now how do I release the round tool?

[Kube]

Clem, Usually tapping it against something hard (your vise) will do the trick.

[Tim Ayers]

What kind do you have? I have one that works like a drill collet. It's a real pain in the ass to get the stud out with this one.

[flatjack9]

Like Kube said. After backing off the top nut of course.

[jim1932]

If it is the one that looks like a socket used two nuts jammed together.

[Clem Clement]

Sponsored Links (Register now to hide all advertisements)

thanks. Ill try

[Mart]

Put the stud in a vise and turn the remover in the tightening direction.

There are various types, What type do you have.

[v8fordman]

Follow Mart's advice.

[Clem Clement]

Thanks Mart. Job done. I was thinking that I had to reuse the stud. Not so and I hope that part of the task is done. I'll change the flex fuel line tomorrow and test start,
Clem