|
![]() |
#1 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
![]()
On the driver side, my window will drift down while driving about an inch. If I have this same window down, it will drift up about an inch. What's happening and what do I need to do to correct it?
Thanks in advance. Tom
__________________
I work very hard to avoid all and any mistakes. I thought I made a mistake once, but I was wrong. |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Oct 2013
Location: Near Olympia WA
Posts: 33
|
![]()
Mine does that also, but I usually have to drive the car more than an inch to have it happen.
(Sorry I had to throw that in....) I suspect a new window regulator would fix it. If there is a easier and cheaper way maybe one of our other members would know. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Auburn Washington
Posts: 2,662
|
![]()
inside your winder on your window regulator there is a clutch spring that will not allow the window to move without turning the handle. I think you have a broken clutch spring. some of the regulators are easy to take apart and fix, and some are a pain to take apart.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Baxter, MN.
Posts: 150
|
![]()
Clean and oil worked for me.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
![]()
If it is a broke clutch spring...is it a replaceable part, and who would have it..(part numbers) if possible.
Thanks so much.
__________________
I work very hard to avoid all and any mistakes. I thought I made a mistake once, but I was wrong. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Nov 2011
Location: Barrington, NJ
Posts: 280
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
I work very hard to avoid all and any mistakes. I thought I made a mistake once, but I was wrong. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
![]()
I also think it's the clutch spring in the window regulator. The heavy counterweight spring must be in good order since the window can drift up or down, but the clutch lock spring isn't holding the shaft tight.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Posts: 564
|
![]()
Mount the handle such as the weight of the handle tends to hold it up when closed and down when open
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
![]()
Chief's Tip# 119, would probably been, "Jist hang a Bull Durham Tobacco sack, full of gravel, on the window crank goody, to keep it up"!! Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|