The Ford Barn

Walt Dupont--Me. · 01-28-2015, 07:29 PM

This 59AB is going in a 35 pickup. It's stock .060 bore -- milled heads for .050 over pistons. Walt

Ray Balukas · 01-28-2015, 07:38 PM

Another Beauty!

Jakno · 01-28-2015, 08:18 PM

Walt, couldn't be prouder or happier. I have the "79th Birthday Anniversary Edition " Motor. Your going to have to sign your name on the Air Cleaner.. Jake

Jakno · 01-29-2015, 10:12 AM

Courtesy of Walter DuPont.

corvette8n · 01-29-2015, 10:36 AM

Walt "you da man" nice Job.

Gumpy · 01-29-2015, 10:48 AM

Sponsored Links (Register now to hide all advertisements)

Nice work Walt I wish I lived a little closer to ya!

T Scott · 01-29-2015, 01:34 PM

Distance is not an issue. I had Walt build a 34 V8 for me and then shipped it to Friday Harbor Washington via Fastenal. No Problem.

Walt Dupont--Me. · 01-29-2015, 09:07 PM

Quote:

Originally Posted by T Scott

Distance is not an issue. I had Walt build a 34 V8 for me and then shipped it to Friday Harbor Washington via Fastenal. No Problem.

Hi T-Scott. If I remember right that for a 34 roadster. Do you have a pic of that car and a pic of the engine in the car? if so could you post it on the barn? Walt

T Scott · 01-30-2015, 12:35 AM

Hi Walt,
It's 34 South American 5 window

I have a picture of the engine with your engraved plate and all and a picture of the car but the engine is not in it. I am doing two cars at a time, a 34 fordor and the coupe. The fordor was pretty good to start with but the coupe was missing 3 inches of it's bottom including the floor, sub rails, and all so that has been time consuming. It is coming nicely though so maybe the engine will go in by May. I'll post pictures. Happy birthday,
Scott

Jakno · 01-30-2015, 05:46 AM

Walt D. puts a 59A back on the road for another 70 years of enjoyment.

Walt Dupont--Me. · 01-30-2015, 09:28 AM

Jake, you shouldn't have taken that pic, my hair was mess up. LOL Walt

Ironrod · 01-30-2015, 10:16 AM

Walt, enjoy your builds. May I ask which valves are in this engine?

Bob

Walt Dupont--Me. · 01-30-2015, 05:06 PM

Quote:

Originally Posted by Ironrod

Walt, enjoy your builds. May I ask which valves are in this engine?

Bob

Bob, that's a stock engine with stock cam, the whole valve train is stock 8BA from Job Lot. Walt

1937pickup · 01-30-2015, 09:35 PM

Great looking work-it is obvious you take pride in what you do.

01-28-2015, 07:38 PM	#2
Ray Balukas Senior Member Join Date: Jul 2011 Location: Deerfield N.H. Posts: 299	Re: another flat motor Walt Another Beauty!

01-28-2015, 08:18 PM	#3
Jakno Senior Member Join Date: Sep 2014 Location: Maine Posts: 325	Re: another flat motor Walt Walt, couldn't be prouder or happier. I have the "79th Birthday Anniversary Edition " Motor. Your going to have to sign your name on the Air Cleaner.. Jake __________________ Lineman, the only dumb animal that can harness himself !!

01-29-2015, 10:36 AM	#5
corvette8n Senior Member Join Date: Jul 2010 Location: 36 miles north of Albany NY Posts: 3,198	Re: another flat motor Walt Walt "you da man" nice Job.

01-29-2015, 10:48 AM	#6
Gumpy Senior Member Join Date: May 2010 Location: Sf bay area Posts: 1,464	Re: another flat motor Walt Sponsored Links (Register now to hide all advertisements) *Nice work Walt I wish I lived a little closer to ya!* __________________ "I believe God is managing affairs and that He doesn't need any advice from me. With God in Charge, I believe everything will work out for the best in the end. So what is there to worry about". Quote by Henry Ford

01-29-2015, 01:34 PM	#7
T Scott Senior Member Join Date: Aug 2010 Location: East Boothbay, Maine Posts: 310	Re: another flat motor Walt Distance is not an issue. I had Walt build a 34 V8 for me and then shipped it to Friday Harbor Washington via Fastenal. No Problem.

01-30-2015, 12:35 AM	#9
T Scott Senior Member Join Date: Aug 2010 Location: East Boothbay, Maine Posts: 310	Re: another flat motor Walt Hi Walt, It's 34 South American 5 window I have a picture of the engine with your engraved plate and all and a picture of the car but the engine is not in it. I am doing two cars at a time, a 34 fordor and the coupe. The fordor was pretty good to start with but the coupe was missing 3 inches of it's bottom including the floor, sub rails, and all so that has been time consuming. It is coming nicely though so maybe the engine will go in by May. I'll post pictures. Happy birthday, Scott

01-30-2015, 09:28 AM	#11
Walt Dupont--Me. Senior Member Join Date: May 2010 Location: Gardiner Me. Posts: 4,200	Re: another flat motor Walt Jake, you shouldn't have taken that pic, my hair was mess up. LOL Walt

01-30-2015, 10:16 AM	#12
Ironrod Member Join Date: Jun 2010 Location: Utica, KY Posts: 81	Re: another flat motor Walt Walt, enjoy your builds. May I ask which valves are in this engine? Bob

01-30-2015, 09:35 PM	#14
1937pickup Senior Member Join Date: Jul 2012 Posts: 586	Re: another flat motor Walt Great looking work-it is obvious you take pride in what you do.