another flat motor Walt
 

This 59AB is going in a 35 pickup. It's stock .060 bore -- milled heads for .050 over pistons. Walt

Re: another flat motor Walt
 

Another Beauty!

Re: another flat motor Walt
 

Walt, couldn't be prouder or happier. I have the "79th Birthday Anniversary Edition " Motor. Your going to have to sign your name on the Air Cleaner.. Jake

Re: another flat motor Walt
 

Courtesy of Walter DuPont.

Re: another flat motor Walt
 

Walt "you da man" nice Job.

Re: another flat motor Walt
 

Re: another flat motor Walt
 

Distance is not an issue. I had Walt build a 34 V8 for me and then shipped it to Friday Harbor Washington via Fastenal. No Problem.

Re: another flat motor Walt
 

Hi T-Scott. If I remember right that for a 34 roadster. Do you have a pic of that car and a pic of the engine in the car? if so could you post it on the barn? Walt

Re: another flat motor Walt
 

Hi Walt,
It's 34 South American 5 window

I have a picture of the engine with your engraved plate and all and a picture of the car but the engine is not in it. I am doing two cars at a time, a 34 fordor and the coupe. The fordor was pretty good to start with but the coupe was missing 3 inches of it's bottom including the floor, sub rails, and all so that has been time consuming. It is coming nicely though so maybe the engine will go in by May. I'll post pictures. Happy birthday,
Scott

Re: another flat motor Walt
 

Walt D. puts a 59A back on the road for another 70 years of enjoyment.

Re: another flat motor Walt
 

Jake, you shouldn't have taken that pic, my hair was mess up. LOL Walt

Re: another flat motor Walt
 

Walt, enjoy your builds. May I ask which valves are in this engine?

Bob

Re: another flat motor Walt
 

Bob, that's a stock engine with stock cam, the whole valve train is stock 8BA from Job Lot. Walt

Re: another flat motor Walt
 

Great looking work-it is obvious you take pride in what you do.