The Ford Barn

bobgreco · 06-27-2011, 08:39 PM

I need a little help figuring out what this part is for. When I took the truck apart, I religiously labeled every piece of hardware, or so I thought. I have this bracket that seems like I should remember where it goes, but I don't. Any help would would be appreciated.

Bob

Rusty Homestead Fl · 06-27-2011, 08:44 PM

Looks like a horn mount to me

bobgreco · 06-27-2011, 08:53 PM

Oh My! One of the few parts I didn't install yet. Hopefully I woudl have eventually figured it out. Thanks a ton Rusty!!!

Tom Wesenberg · 06-27-2011, 11:11 PM

Sponsored Links (Register now to hide all advertisements)

The 2 longer screws on the horn flange, which are used to hold this mount, are the only ones to use lock washers.

06-27-2011, 08:44 PM	#2
Rusty Homestead Fl Senior Member Join Date: May 2010 Location: Homestead, Fl Posts: 351	Re: Part ID Help Needed Looks like a horn mount to me

06-27-2011, 08:53 PM	#3
bobgreco Senior Member Join Date: Aug 2010 Location: Wisconsin Posts: 222	Re: Part ID Help Needed Oh My! One of the few parts I didn't install yet. Hopefully I woudl have eventually figured it out. Thanks a ton Rusty!!!

06-27-2011, 11:11 PM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: Part ID Help Needed Sponsored Links (Register now to hide all advertisements) The 2 longer screws on the horn flange, which are used to hold this mount, are the only ones to use lock washers.