|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: May 2010
Location: Christchurch New Zealand
Posts: 55
|
![]()
Can anybody tell me where the dash light bulb is fitted on a 1933-34 pickup? I can't find a housing on the back of the dash.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,601
|
![]()
Above the speedometer; there should be a bracket to insert the bulb socket and wire assembly.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Midland, MI
Posts: 226
|
![]()
Just what Dave said. That is what I have on my "34.
Henry |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Wichita, KS
Posts: 210
|
![]()
Here's a picture of the dash light bracket. It attaches behind the dashboard with the central screw the holds the dash board.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Wichita, KS
Posts: 210
|
![]()
Here's a picture of the dash light bracket. It attaches behind the dashboard with the central screw that holds the dash board.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Wichita, KS
Posts: 210
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Member
Join Date: May 2010
Location: Christchurch New Zealand
Posts: 55
|
![]()
I figured the housing bracket must mount behind the central dash screw, following the reply from David G. I didn't have the bracket itself when posting the question but I have since located it among my parts and it all make sense now. Thanks for the help!
|
![]() |
![]() |
![]() |
#8 |
Junior Member
Join Date: May 2020
Posts: 1
|
![]()
Hello, Would you happen to know the part number for the bracket and light? I have 46 13727 but not sure if its correct. It came out of a 1933 Model BB pickup truck
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Posts: 2,912
|
![]()
I posted one such bracket For Sale. The switch and lamp are reproduced. It must ground to the dash and the dash must then ground for complete circuit, no pads behind the dash screws. Newc
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: Colfax, CA
Posts: 439
|
![]()
I have 2 extra mounts if anyone is looking for one send me a message. Tim
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|