The Ford Barn

ssffnomad · 03-24-2025, 11:56 AM

Hello. I have a 39’ Deluxe steering wheel.
Do not have a Horn Button.
It’s going in our 36’ Coupe build.
I do not need the Rod , as we are not using a bottom of box switch.
Question is, do you know if a 36’ horn button will fit a 39’ wheel ?

fordv8j · 03-24-2025, 05:46 PM

I have a horn button for a 38 Deluxe, complete except rod is not on it, $40.00 plus shipping--304-462-5332==J Parsons==Normantown, [email protected]

KiWinUS · 03-24-2025, 05:59 PM

To ANSWER your question. No a 36 will not fit your 39 wheel correctly.

johndee138 · 03-24-2025, 08:20 PM

I used the hole that the throttle rod went through for a small button that honks my horn, the stock setup was unreliable.

TJ · 03-25-2025, 09:52 AM

Sponsored Links (Register now to hide all advertisements)

The 38 button will fit your wheel. If you are going to install a separate horn button and just want to fill the hole in the steering wheel you can use a 30-31 Model A hubcap. I did this years ago when I put a '39 banjo wheel on a '36 Ford.

03-24-2025, 11:56 AM	#1
ssffnomad Senior Member Join Date: Aug 2021 Location: Upstate N.Y. Posts: 544	Horn Buttons. Hello. I have a 39’ Deluxe steering wheel. Do not have a Horn Button. It’s going in our 36’ Coupe build. I do not need the Rod , as we are not using a bottom of box switch. Question is, do you know if a 36’ horn button will fit a 39’ wheel ?

03-24-2025, 05:46 PM	#2
fordv8j Senior Member Join Date: Jan 2015 Posts: 392	Re: Horn Buttons. I have a horn button for a 38 Deluxe, complete except rod is not on it, $40.00 plus shipping--304-462-5332==J Parsons==Normantown, [email protected]

03-24-2025, 05:59 PM	#3
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,262	Re: Horn Buttons. To ANSWER your question. No a 36 will not fit your 39 wheel correctly.

03-24-2025, 08:20 PM	#4
johndee138 Senior Member Join Date: Jun 2010 Location: Atlanta GA Posts: 522	Re: Horn Buttons. I used the hole that the throttle rod went through for a small button that honks my horn, the stock setup was unreliable.

03-25-2025, 09:52 AM	#5
TJ Senior Member Join Date: May 2010 Location: Napa,California Posts: 6,564	Re: Horn Buttons. Sponsored Links (Register now to hide all advertisements) The 38 button will fit your wheel. If you are going to install a separate horn button and just want to fill the hole in the steering wheel you can use a 30-31 Model A hubcap. I did this years ago when I put a '39 banjo wheel on a '36 Ford. Last edited by TJ; 03-25-2025 at 09:59 AM.