The Ford Barn

The Ford Barn (https://www.fordbarn.com/forum/index.php)
-   Early V8 (1932-53) (https://www.fordbarn.com/forum/forumdisplay.php?f=4)
-   -   Horn Buttons. (https://www.fordbarn.com/forum/showthread.php?t=347712)

ssffnomad 03-24-2025 11:56 AM

Horn Buttons.
 

Hello. I have a 39’ Deluxe steering wheel.
Do not have a Horn Button.
It’s going in our 36’ Coupe build.
I do not need the Rod , as we are not using a bottom of box switch.
Question is, do you know if a 36’ horn button will fit a 39’ wheel ?

fordv8j 03-24-2025 05:46 PM

Re: Horn Buttons.
 

I have a horn button for a 38 Deluxe, complete except rod is not on it, $40.00 plus shipping--304-462-5332==J Parsons==Normantown, [email protected]

KiWinUS 03-24-2025 05:59 PM

Re: Horn Buttons.
 

To ANSWER your question. No a 36 will not fit your 39 wheel correctly.

johndee138 03-24-2025 08:20 PM

Re: Horn Buttons.
 

I used the hole that the throttle rod went through for a small button that honks my horn, the stock setup was unreliable.

TJ 03-25-2025 09:52 AM

Re: Horn Buttons.
 

The 38 button will fit your wheel. If you are going to install a separate horn button and just want to fill the hole in the steering wheel you can use a 30-31 Model A hubcap. I did this years ago when I put a '39 banjo wheel on a '36 Ford.


All times are GMT -5. The time now is 09:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.