1950 Ford oil filter canister tube 6746 gaskets

[Wallysdog]

Looking for the two washers that seal the oil filter tube on the top and bottom. The Ford # is 6746 and I am thinking they are a 9/16" ID neoprene washer. Thank you.
Jim-

[19Fordy]

Wally, I have had good luck with with these.
https://www.pegasusautoracing.com/pr...20group%20%231

[petehoovie]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by 19Fordy

Wally, I have had good luck with with these.
https://www.pegasusautoracing.com/pr...20group%20%231

Soft Copper Crush Washer








Copper Crush Washer Dimensions ID (Nominal) OD Thickness Minimum Hex Size 5/16" / 8mm 0.435" / 11mm 3/64" / 1.2mm 7/16" / 11mm 3/8" / 10mm 0.585" / 15mm 3/64" / 1.2mm 9/16" / 15mm 7/16" / 11.1mm 5/8" / 16mm 1/16" / 1.6mm 9/16" / 15mm 1/2" / 12.7mm 11/16" / 17.5mm 1/16" / 1.6mm 5/8" / 16mm M14 / 9/16" 18.4mm / 0.725" 1.2mm / 3/64" 16mm / 5/8"