|
1950 Ford oil filter canister tube 6746 gaskets Looking for the two washers that seal the oil filter tube on the top and bottom. The Ford # is 6746 and I am thinking they are a 9/16" ID neoprene washer. Thank you.
Jim- |
Re: 1950 Ford oil filter canister tube 6746 gaskets Wally, I have had good luck with with these.
https://www.pegasusautoracing.com/pr...20group%20%231 |
Re: 1950 Ford oil filter canister tube 6746 gaskets Quote:
https://www.pegasusautoracing.com/im.../3241-2023.JPG https://www.pegasusautoracing.com/im...3241-GROUP.JPG Copper Crush Washer Dimensions ID (Nominal) OD Thickness Minimum Hex Size 5/16" / 8mm 0.435" / 11mm 3/64" / 1.2mm 7/16" / 11mm 3/8" / 10mm 0.585" / 15mm 3/64" / 1.2mm 9/16" / 15mm 7/16" / 11.1mm 5/8" / 16mm 1/16" / 1.6mm 9/16" / 15mm 1/2" / 12.7mm 11/16" / 17.5mm 1/16" / 1.6mm 5/8" / 16mm M14 / 9/16" 18.4mm / 0.725" 1.2mm / 3/64" 16mm / 5/8" |
| All times are GMT -5. The time now is 10:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.