The Ford Barn

Seth Swoboda · 03-19-2024, 08:10 AM

Can anyone idendify this cluster gear for me? The hole in the center is 3/4 in. It is very similar to a V8 60 cluster gear. The burs on the end gear are throwing me off. Thanks.

Terry,OH · 03-19-2024, 09:15 AM

The teeth at the end of the gear hold a thrush washer in place. Gear appears early like 35-36

petehoovie · 03-19-2024, 11:22 AM

Quote:

Originally Posted by Seth Swoboda

Can anyone idendify this cluster gear for me? The hole in the center is 3/4 in. It is very similar to a V8 60 cluster gear. The burs on the end gear are throwing me off. Thanks.

Mac VP · 03-20-2024, 04:47 AM

Post the tooth count. We should be able to figure out exactly which gear it is.

Seth Swoboda · 03-20-2024, 08:56 AM

Quote:

Originally Posted by Mac VP

Post the tooth count. We should be able to figure out exactly which gear it is.

Looks like the big gear is 29 tooth. If you need the other tooth counts I'll get them at lunch today.

rotorwrench · 03-20-2024, 10:40 AM

Sponsored Links (Register now to hide all advertisements)

Part straight cut spur gears puts it in the pre-1936 area for passenger cars. Pickups may have had spur gears for a bit longer but most went to helical after the start of the 1936 model year.

Seth Swoboda · 03-20-2024, 07:40 PM

29-19-17-13 are the tooth counts. This is V8 60 I believe???

03-19-2024, 09:15 AM	#2
Terry,OH Senior Member Join Date: May 2010 Posts: 5,187	Re: Cluster Gear ID The teeth at the end of the gear hold a thrush washer in place. Gear appears early like 35-36

03-20-2024, 04:47 AM	#4
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,430	Re: Cluster Gear ID Post the tooth count. We should be able to figure out exactly which gear it is. __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com

03-20-2024, 10:40 AM	#6
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 17,410	Re: Cluster Gear ID Sponsored Links (Register now to hide all advertisements) Part straight cut spur gears puts it in the pre-1936 area for passenger cars. Pickups may have had spur gears for a bit longer but most went to helical after the start of the 1936 model year.

03-20-2024, 07:40 PM	#7
Seth Swoboda Senior Member Join Date: May 2010 Location: Southern Illinois Posts: 4,079	Re: Cluster Gear ID 29-19-17-13 are the tooth counts. This is V8 60 I believe??? Last edited by Seth Swoboda; 03-21-2024 at 11:06 AM.