Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 02-23-2023, 06:50 PM   #1
AnthonyG
Senior Member
 
AnthonyG's Avatar
 
Join Date: May 2013
Location: Pa.
Posts: 2,217
Default Coolant blew out overflow on radiator?

8BA/ flushed engine, put new antifreeze green, while idling during timing & carbs adjust it decided to blow out about a quart or so of new coolant. I have temp gauges on both banks & it wasn’t running hot, 185 right side 195 left side. After blowing out the quart+ it stopped. I let it continue running & temp stayed about the same. I’m delinquent in flushing & changing , been a few years. Engine has 4” bore Merc crank, domed pistons, 2 X 2 Holley 94, oversize valves, Mallory e-Dist. & Isky cam.
I vaguely remember a post & thread a few years ago saying if engine & radiator r over filled it should seek its own level ( I filled to about a 1/2 “ below top of rad. Tank)? While it didn’t happen a few years ago that I remember I’m
Thinking that’s Probly what happened?
__________________
Nomad
AnthonyG is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 02:33 PM.