Weatherhead fitting source.

[russcc]

I have used an early, (1970's), Weatherhead adapter fitting that works great
when you have a none stock fuel system in an early V8 Ford. Up until recently I was able to get them from the local NAPA store, but they ran out of old inventory, The fitting adapts the Ford 1/4" male compression type fitting to 1/8" pipe thread which provides more hookup options. Anyone know a source for these. The original Weatherhead # is 1513. See photos. Thank you.

[leon bee]

Here's about the only thing I saw:

https://www.hydraulicstore.com/conne...atherhead.html

[leon bee]

Here's another. Those things must be gold plated:

https://www.applied.com/c-brands/c-e...er/p/105267304

[Bob C]

Try Renner's Corner. I think item B-92288-FLA is what your looking for.
Fourth item down at the link. https://www.rennerscorner.com/carburetor.html

[russcc]

Thank you all for the tips. emailed David at Renner's Corner. This is the application I use this fitting in,

[uncle buck]

Sponsored Links (Register now to hide all advertisements)

Take a look at a Gates # G49240-0204 fitting. It should be the same thing and is readily available from your NAPA store

[russcc]

Thank you. Will check that out.