The Ford Barn

FRANK PKNY · 05-30-2017, 09:16 AM

After first starting my fresh rebuild I noticed the carb leaking. Cleaned the ball valve(that replaced the needle valve) . Here is a short video shows the correct setting for the float level. Hope this helps some members not familiar with this procedure. Frank PKNY

https://www.youtube.com/watch?v=WwRZCws8EeQ

JDupuis · 05-30-2017, 02:10 PM

Sponsored Links (Register now to hide all advertisements)

Good video Frank. Thanks for posting.
Jeff

05-30-2017, 09:16 AM	#1
FRANK PKNY Senior Member Join Date: May 2010 Location: POUGHKEEPSIE NY 12601 Posts: 1,020	Correct the Zenith leaking fuel After first starting my fresh rebuild I noticed the carb leaking. Cleaned the ball valve(that replaced the needle valve) . Here is a short video shows the correct setting for the float level. Hope this helps some members not familiar with this procedure. Frank PKNY https://www.youtube.com/watch?v=WwRZCws8EeQ __________________ [email protected]

05-30-2017, 02:10 PM	#2
JDupuis Senior Member Join Date: Jan 2017 Location: Maryhill Ont Canada Posts: 834	Re: Correct the Zenith leaking fuel Sponsored Links (Register now to hide all advertisements) Good video Frank. Thanks for posting. Jeff __________________ Let's let pylons, be pylons!