|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Palmer, Alaska
Posts: 1,587
|
![]()
Can anyone tell me if there is a difference between the 1930-31 1/4 window moldings compared to the 1928-29 moldings? I also need to know if there is a difference between the rear window moldings. If there is a difference, how do you tell them apart? I have a project 30-31 coupe and all the inside window moldings are missing. It is also missing the one on the drivers door. any help would be appreciated . Thanks, ----Jim
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Palmer, Alaska
Posts: 1,587
|
![]()
forever4, thanks for the info, any way to tell which one is which, by looking at them? Thank you.---Jim
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Englewood, Colorado
Posts: 1,377
|
![]()
1928-1929 Coupe quarter window moldings are about 1 inch taller then the 1930-1931 ones, as is the glass. On a side note, the 1928-1929 ones are the same left and right and the 1930-1931 ones are different left and right.
Steve @ Bert's |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Palmer, Alaska
Posts: 1,587
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|