The Ford Barn

john in illinois · 11-04-2015, 02:03 PM

I use a made in USA "modern" starter drive on my 4 cyl Model A and it has held up well. How do they do on a flathead?

John

Bassman/NZ · 11-04-2015, 02:08 PM

I have one. Worry free.

36fordguy · 11-04-2015, 07:43 PM

I have an ECA motor with a cast iron bell adapter and it will not fit 36fordguy

scooder · 11-05-2015, 02:52 AM

Here's an odd thing, that rubber type "modern" starter drive, Ford had a play with this idea in the mid 30's. Seen pics in the service bulletins, but never seen one.
Anyone seen the beast?
Martin.

alan · 11-05-2015, 08:23 AM

I have used three so far, 8CM-ok, 59AB-would not work-stuck in flywheel, tried a totally different starter with "modern drive" it also stuck. changed to USA built old style and works great. all on 12 volt

4t8v8 · 11-05-2015, 11:43 PM

Sponsored Links (Register now to hide all advertisements)

Mine has worked great for a little over a year now. Only problem was having to do a little grinding to get it to slip into the bell housing.

Walt Dupont--Me. · 11-06-2015, 08:17 AM

Quote:

Originally Posted by alan

I have used three so far, 8CM-ok, 59AB-would not work-stuck in flywheel, tried a totally different starter with "modern drive" it also stuck. changed to USA built old style and works great. all on 12 volt

Ware do I get a ( USA built old style starter drive with spring ) for 41 Ford 6 volt? A friend paid a lot money to have his starter rebuilt with the China drive and the drive didn't last very long. Thanks Walt

alan · 11-06-2015, 02:40 PM

information off the box that starter drive is in

Weldon, 108835C 10T CCW, I purchase mine from my local rebuilder.
Auto Electric
864-233-8387 ask for Glenn

11-04-2015, 02:03 PM	#1
john in illinois Senior Member Join Date: May 2010 Location: Illinois Posts: 2,220	Barrel type starter drive I use a made in USA "modern" starter drive on my 4 cyl Model A and it has held up well. How do they do on a flathead? John

11-04-2015, 02:08 PM	#2
Bassman/NZ Senior Member Join Date: May 2010 Location: Napier, New Zealand Posts: 2,001	Re: Barrel type starter drive I have one. Worry free.

11-04-2015, 07:43 PM	#3
36fordguy Member Join Date: May 2010 Posts: 74	Re: Barrel type starter drive I have an ECA motor with a cast iron bell adapter and it will not fit 36fordguy

11-05-2015, 02:52 AM	#4
scooder Senior Member Join Date: Jul 2010 Posts: 2,595	Re: Barrel type starter drive Here's an odd thing, that rubber type "modern" starter drive, Ford had a play with this idea in the mid 30's. Seen pics in the service bulletins, but never seen one. Anyone seen the beast? Martin.

11-05-2015, 08:23 AM	#5
alan Senior Member Join Date: Jul 2010 Location: UPSTATESC Posts: 669	Re: Barrel type starter drive I have used three so far, 8CM-ok, 59AB-would not work-stuck in flywheel, tried a totally different starter with "modern drive" it also stuck. changed to USA built old style and works great. all on 12 volt

11-05-2015, 11:43 PM	#6
4t8v8 Senior Member Join Date: Nov 2011 Location: NW Arkansas Posts: 526	Re: Barrel type starter drive Sponsored Links (Register now to hide all advertisements) Mine has worked great for a little over a year now. Only problem was having to do a little grinding to get it to slip into the bell housing.

11-06-2015, 02:40 PM	#8
alan Senior Member Join Date: Jul 2010 Location: UPSTATESC Posts: 669	Re: Barrel type starter drive information off the box that starter drive is in Weldon, 108835C 10T CCW, I purchase mine from my local rebuilder. Auto Electric 864-233-8387 ask for Glenn