The Ford Barn

hb32 · 07-10-2015, 04:47 PM

Not having much luck but looking for the correct position for the bearing, grease cup etc on a 32.
Thanks

Andy · 07-10-2015, 05:38 PM

Make sure the top of the spindle is not worn. A lot are. Pin goes into the top of the spindle with the bearing on top of the spindle, then thru the axle and out the bottom of the spindle.
If the top of the spindle is worn the bottom of the axle may drag on the on the lower spindle lug.

scooder · 07-10-2015, 05:59 PM

Stock 32 parts order as follows,
Bearing slides onto king pin then king pin goes through top spindle eye then axle eye then grease cup and seal then bottom spindle eye.
Martin.

hb32 · 07-10-2015, 06:42 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by scooder

Stock 32 parts order as follows,
Bearing slides onto king pin then king pin goes through top spindle eye then axle eye then grease cup and seal then bottom spindle eye.
Martin.

Thanks Martin and appreciate the education.

07-10-2015, 04:47 PM	#1
hb32 Senior Member Join Date: Aug 2012 Location: Nanaimo Vancouver Island B.C. Canada Posts: 1,075	32 king pin stackup Not having much luck but looking for the correct position for the bearing, grease cup etc on a 32. Thanks

07-10-2015, 05:38 PM	#2
Andy Senior Member Join Date: May 2010 Location: Kerrville, Tx Posts: 2,880	Re: 32 king pin stackup Make sure the top of the spindle is not worn. A lot are. Pin goes into the top of the spindle with the bearing on top of the spindle, then thru the axle and out the bottom of the spindle. If the top of the spindle is worn the bottom of the axle may drag on the on the lower spindle lug.

07-10-2015, 05:59 PM	#3
scooder Senior Member Join Date: Jul 2010 Posts: 2,595	Re: 32 king pin stackup Stock 32 parts order as follows, Bearing slides onto king pin then king pin goes through top spindle eye then axle eye then grease cup and seal then bottom spindle eye. Martin.