Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-26-2015, 05:02 PM   #1
freak
Senior Member
 
freak's Avatar
 
Join Date: Sep 2013
Location: Pemberville, Ohio
Posts: 457
Default How to install windshield frame gasket?

1930 fordor...

1. What are you supposed to do about the nut on each side that goes between the gasket and the frame? Seems there is not room for both. The only options seems to be to force it in and distort the gasket. Or should I stop the gasket short of the screw/nut?

2. How do I finish the corners? Cut each at a 45 degree angle? Then attempt to glue them? Leave them alone?

Last edited by freak; 04-26-2015 at 05:15 PM.
freak is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 11:01 PM.