The Ford Barn

Fullraceflathead · 03-18-2015, 10:48 AM

Does anyone already have a list of all the reamers sizes used on the Model A's?
I have the Spindle Bushing one already.
I know the .500 for the Distributor Bushings.
.559 for the Brakes.
.875 for the Pedals.
Any others?

BRENT in 10-uh-C · 03-18-2015, 01:23 PM

Here is a list I have from several years ago. I use a Honing Machine now but this should get you started;

Oil Pump ............................ 0.500
Brake Actuator .................0.559
Rear Brake Camshaft.... 0.688
King Pin ................................0.814
Pedal Shafts .......................0.874
Piston Pins ..........................0.990
Sector Housing .................1.125

Fullraceflathead · 03-18-2015, 03:35 PM

Thanks! Now I can keep an eye out for them at the used Machinist Swap meets.

Brentwood Bob · 03-19-2015, 10:33 PM

Sponsored Links (Register now to hide all advertisements)

distributor bushing 0.500
water pump shaft bushing 0.625

03-18-2015, 10:48 AM	#1
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,684	Model A reamer sizes used. Does anyone already have a list of all the reamers sizes used on the Model A's? I have the Spindle Bushing one already. I know the .500 for the Distributor Bushings. .559 for the Brakes. .875 for the Pedals. Any others? __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

03-18-2015, 01:23 PM	#2
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,972	Re: Model A reamer sizes used. Here is a list I have from several years ago. I use a Honing Machine now but this should get you started; Oil Pump ............................ 0.500 Brake Actuator .................0.559 Rear Brake Camshaft.... 0.688 King Pin ................................0.814 Pedal Shafts .......................0.874 Piston Pins ..........................0.990 Sector Housing .................1.125 __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

03-18-2015, 03:35 PM	#3
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,684	Re: Model A reamer sizes used. Thanks! Now I can keep an eye out for them at the used Machinist Swap meets. __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

03-19-2015, 10:33 PM	#4
Brentwood Bob Senior Member Join Date: May 2010 Location: brentwood, ca Posts: 4,420	Re: Model A reamer sizes used. Sponsored Links (Register now to hide all advertisements) distributor bushing 0.500 water pump shaft bushing 0.625