Model A reamer sizes used.
 

Does anyone already have a list of all the reamers sizes used on the Model A's?
I have the Spindle Bushing one already.
I know the .500 for the Distributor Bushings.
.559 for the Brakes.
.875 for the Pedals.
Any others?

Re: Model A reamer sizes used.
 

Here is a list I have from several years ago. I use a Honing Machine now but this should get you started;

Oil Pump ............................ 0.500
Brake Actuator .................0.559
Rear Brake Camshaft.... 0.688
King Pin ................................0.814
Pedal Shafts .......................0.874
Piston Pins ..........................0.990
Sector Housing .................1.125

Re: Model A reamer sizes used.
 

Thanks! Now I can keep an eye out for them at the used Machinist Swap meets.

Re: Model A reamer sizes used.
 

distributor bushing 0.500
water pump shaft bushing 0.625