The Ford Barn

art · 02-02-2015, 03:50 PM

Does anyone know the correct part number for the front wheel (drum brake)cylinder for the title car?

paul2748 · 02-02-2015, 09:13 PM

Just go to NAPA and ask for a 65 Mustang wheel cylinder.

ponymare · 02-03-2015, 01:04 PM

It might get a little more complicated than just asking for the cyl, might have to know the drum size, V8 or 6 cyl, and the size of the cyl bore. It will say on the rubber cup inside, like 7/8, 15/16, 21/32.

raceron1120 · 02-04-2015, 08:22 PM

Looks like the correct Ford #s are - Right side: C5DZ-2061-A. Left side: C5DZ-2062-A.

BUT there are others that might also work. These numbers appear to be the ones used at the time of production but obsolete/supersede/interchanges take place frequently so others may be listed as well.

art · 02-06-2015, 12:27 PM

Thank you all for your input. I have my problem solved
Art

mobileparts · 02-17-2015, 04:29 PM

Sponsored Links (Register now to hide all advertisements)

Footnote -- if you value your car -- I have some N.O.S. Front & Rear ++ Asbestos ++
Brake Shoes for these:
Fronts are 10" x 2 1/4" and Rears are 10" x 1 3/4".......
I also have the 390 & 428 applications where they "beefed it up" and did
10" x 2 1/2" in the Fronts and 10" x 2" in the Rears.....
At the moment -- have all of the above in N.O.S. ++ asbestos ++ !!!!!!!!!!!!!!!!

02-02-2015, 03:50 PM	#1
art Member Join Date: May 2010 Location: Joliet, IL Posts: 29	1965 Mustang 289 V8 4.7L Does anyone know the correct part number for the front wheel (drum brake)cylinder for the title car?

02-02-2015, 09:13 PM	#2
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 4,290	Re: 1965 Mustang 289 V8 4.7L Just go to NAPA and ask for a 65 Mustang wheel cylinder.

02-03-2015, 01:04 PM	#3
ponymare Senior Member Join Date: Sep 2014 Posts: 160	Re: 1965 Mustang 289 V8 4.7L It might get a little more complicated than just asking for the cyl, might have to know the drum size, V8 or 6 cyl, and the size of the cyl bore. It will say on the rubber cup inside, like 7/8, 15/16, 21/32.

02-04-2015, 08:22 PM	#4
raceron1120 Senior Member Join Date: May 2010 Location: Ellsworth Michigan Posts: 1,824	Re: 1965 Mustang 289 V8 4.7L Looks like the correct Ford #s are - Right side: C5DZ-2061-A. Left side: C5DZ-2062-A. BUT there are others that might also work. These numbers appear to be the ones used at the time of production but obsolete/supersede/interchanges take place frequently so others may be listed as well.

02-06-2015, 12:27 PM	#5
art Member Join Date: May 2010 Location: Joliet, IL Posts: 29	Re: 1965 Mustang 289 V8 4.7L Thank you all for your input. I have my problem solved Art

02-17-2015, 04:29 PM	#6
mobileparts Senior Member Join Date: Feb 2014 Location: West Hempstead, New York Posts: 171	Re: 1965 Mustang 289 V8 4.7L Sponsored Links (Register now to hide all advertisements) Footnote -- if you value your car -- I have some N.O.S. Front & Rear ++ Asbestos ++ Brake Shoes for these: Fronts are 10" x 2 1/4" and Rears are 10" x 1 3/4"....... I also have the 390 & 428 applications where they "beefed it up" and did 10" x 2 1/2" in the Fronts and 10" x 2" in the Rears..... At the moment -- have all of the above in N.O.S. ++ asbestos ++ !!!!!!!!!!!!!!!!