1965 Mustang 289 V8 4.7L
 

Re: 1965 Mustang 289 V8 4.7L
 

Just go to NAPA and ask for a 65 Mustang wheel cylinder.

Re: 1965 Mustang 289 V8 4.7L
 

It might get a little more complicated than just asking for the cyl, might have to know the drum size, V8 or 6 cyl, and the size of the cyl bore. It will say on the rubber cup inside, like 7/8, 15/16, 21/32.

Re: 1965 Mustang 289 V8 4.7L
 

Looks like the correct Ford #s are - Right side: C5DZ-2061-A. Left side: C5DZ-2062-A.

BUT there are others that might also work. These numbers appear to be the ones used at the time of production but obsolete/supersede/interchanges take place frequently so others may be listed as well.

Re: 1965 Mustang 289 V8 4.7L
 

Thank you all for your input. I have my problem solved
Art

Re: 1965 Mustang 289 V8 4.7L
 

Footnote -- if you value your car -- I have some N.O.S. Front & Rear ++ Asbestos ++
Brake Shoes for these:
Fronts are 10" x 2 1/4" and Rears are 10" x 1 3/4".......
I also have the 390 & 428 applications where they "beefed it up" and did
10" x 2 1/2" in the Fronts and 10" x 2" in the Rears.....
At the moment -- have all of the above in N.O.S. ++ asbestos ++ !!!!!!!!!!!!!!!!