The Ford Barn

PhoenixFear · 06-09-2013, 12:13 AM

I'm trying to find the torque of the six bolts that hold the transmission mount to the transmission case. Also if the four u-joint housing bolts to the transmission mount have a torque. Thanks.

Bluebell · 06-09-2013, 03:52 AM

For the 6 bolts in the back of the box, They are 3/8" UNC, right?
If so 12ft lb oiled or 16 ft lb dry. That's for grade 2 bolts.
The holes may go right through, which means a sealant is required on the threads.

PhoenixFear · 06-09-2013, 10:46 AM

Sponsored Links (Register now to hide all advertisements)

I figured it was around 17-20. I'll put a little sealant on the threads before I finish this up. Thanks.

06-09-2013, 12:13 AM	#1
PhoenixFear Senior Member Join Date: Jun 2010 Location: Utica, MI Posts: 361	Transmission mount torque I'm trying to find the torque of the six bolts that hold the transmission mount to the transmission case. Also if the four u-joint housing bolts to the transmission mount have a torque. Thanks.

06-09-2013, 03:52 AM	#2
Bluebell Senior Member Join Date: Nov 2012 Location: Tauranga, New Zealand Posts: 726	Re: Transmission mount torque For the 6 bolts in the back of the box, They are 3/8" UNC, right? If so 12ft lb oiled or 16 ft lb dry. That's for grade 2 bolts. The holes may go right through, which means a sealant is required on the threads.

06-09-2013, 10:46 AM	#3
PhoenixFear Senior Member Join Date: Jun 2010 Location: Utica, MI Posts: 361	Re: Transmission mount torque Sponsored Links (Register now to hide all advertisements) I figured it was around 17-20. I'll put a little sealant on the threads before I finish this up. Thanks.