Transmission mount torque
 

I'm trying to find the torque of the six bolts that hold the transmission mount to the transmission case. Also if the four u-joint housing bolts to the transmission mount have a torque. Thanks.

Re: Transmission mount torque
 

For the 6 bolts in the back of the box, They are 3/8" UNC, right?
If so 12ft lb oiled or 16 ft lb dry. That's for grade 2 bolts.
The holes may go right through, which means a sealant is required on the threads.

Re: Transmission mount torque
 

I figured it was around 17-20. I'll put a little sealant on the threads before I finish this up. Thanks.